More Power Equals More Performance

How To Increase Power On Your Dirt Bike

We all want to get the best performance from our dirt bike. If you have the need for speed and want to see the speedometer breach the 120 mph level, you would definitely want to rev up the power of your dirt bike. Here are five ways you can give your ride an additional boost.

Invest in high free flow filters

With a high free flow filter, air comes in without any obstruction. If your dirt bike is a stock model, it will come with a particular ratio of air and fuel. So if the ratio of the stock is 5:1, this means there is 5% air and 1% fuel. Considering a free flow filter means you should also consider increasing the fuel ratio. You can do this through re-jetting.

Re-jetting means burning all fuels by changing your spark plug, cable, and getting a high-performance ignition coil for enhanced and high voltage burning of fuel.

Increase the air intake

This is the easiest and cheapest way to get the best performance from your dirt bike. You can increase air intake by 50 percent by putting on a mushroom head. A stock model will help add more turbulence and reduce airflow, while an aftermarket version will provide the right balance of air filtration and boost airflow for the best performance.

However, a mushroom head may increase fuel consumption which would cause the thinning of air mixture. To fix this, you need to adjust the carburetor of your dirt bike. A slight adjustment could lead to a low-speed and high-speed air mixture ratio adjustment which could lead to a normal air mixture ratio.

Add lubrication to the chain

A rusty or dirty chain could cause your dirt bike to lose horsepower, resulting in poor handling. The market offers lubricating oils to enhance the performance of your dirt bike. There are high performance lubes on the market you can consider. It is, however, important to choose the right lubricant as the wrong choice could greatly reduce the performance of your bike.

Consider Modifications

Modification is one of the most popular ways to increase the performance of your bike. For example, you can modify the ignition system to give your bike more spark and energy. You can also opt for a bigger control angle or get a better spark plug.

Another modification you can consider for your bike is changing your exhaust system. Doing this could improve the performance, appearance, and sound of your bike. It will also lead to a weight reduction on your bike, giving it more horsepower.

Reducing Gear

Another way to boost the performance of your bike is to lower the gears. You can do it by either changing the front or rear sprocket. You can either choose a front sprocket with one less tooth or a rear sprocket with more teeth. While modifying the front sprocket is much easier, it could result to a damaged counter-shaft. You are better off changing the rear sprocket.

With these tips, you can look forward to getting the best mileage and performance from your dirt bike.

Leave a Reply

Your email address will not be published. Required fields are marked *